The tariff classification of filters from Italy
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 22, 2025, you requested a tariff classification ruling. Descriptive literature was provided for our review. The first item under consideration is described as a CSD filtering cartridge (model CSD40000A10A), which is a filter designed to operate under medium pressure levels of up to 50 bar. The filters deliver optimal performance when used in hydrostatic drives, earthmoving machines, compressors, and converters.
The filters are easily replaced through a quick, clean, and simple procedure. This characteristic is said to be particularly important in demanding work environments where conditions are highly deteriorated. CSD cartridges can handle flow rates of up to 140 l/min. Utilizing the threaded end, the compact filter can be directly mounted onto the engine or transmission. The filter element itself is engineered to resist deformation, distortion, and strain, preventing any release of trapped contaminants.
This enhances filtration performance and allows for efficient contaminant accumulation, even under challenging conditions such as high differential pressure or water hammer effects caused by cold starts and variable discharge flow rates. These features make CSD spin-on filters suitable for use with lubricating oils, fuels, emulsions, and most synthetic fluids.
The second item under consideration is described as the CF filter element series (model CF06540568), which are devices installed on tank return line filters located near internal combustion engines and power transmission systems. They are designed for the filtration of hydraulic oils in numerous engine-driven systems and transmissions that support mechanical and process operations. These elements can handle flow rates of up to 175 l/min, with a maximum working pressure of 6 bar.
The filter operates in an inside-to-outside flow configuration and is suitable for use with both mineral and synthetic oils in combustion engine applications such as agricultural equipment, container hook loaders, and lorry-mounted cranes. The third item under consideration is described as the DFN air/oil separator (model DFN2752401U). The device is designed to retain most of the aerosol oil present in the compressed air flow, generated by entrainment during screw or vane lubrication.
The compressed air, contaminated by microscopic oil droplets and solid particles, passes through the first layer of reinforced borosilicate microfibers. Within this layer, the aerosol droplets, smaller than one micron in size, coalesce into larger drops. These are subsequently captured and drained by a second layer of synthetic porous material, and, due to gravity, collect on the dry side of the separator.
The DFN separators are designed for a maximum flow rate of 10.3 m³/min and a maximum working pressure of 20 bar. Air/oil separators are installed in a pressure vessel located inside the screw compressor. During the compression process of oil-cooled compressors, oil is used to seal, lubricate, and cool the air, which is later directed to large combustion engines.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355172).