The tariff classification of an LED electrical properties tester from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 2, 2025, you requested a tariff classification ruling. Descriptive literature was provided for our review. The item under consideration is described as an LED electrical properties tester (model GSIV-22A), which is a sophisticated, software-controlled solar simulator designed to accurately replicate natural sunlight. It boasts a Class AAA rating for its spectral match, spatial uniformity, and temporal stability.
The device utilizes an array of high-power LEDs to generate the AM1.5G solar spectrum, covering wavelengths between 350 and 1050 nm. Key features include instant-on capability, a long lifespan, energy efficiency, and precise control over individual LED wavelengths and total irradiance via user-friendly software. This makes it highly suitable for applications requiring consistent and controllable light, such as solar cell characterization, photocatalysis, and artificial photosynthesis.
In operation, a user places a solar module inside the machine, connects electrical leads and temperature sensors, and then initiates a measurement after closing the doors. The LED lights activate, and an electronic load adjusts the current and voltage to acquire the solar module's current/voltage (I-V) characteristic. Optionally, the software can perform corrections for irradiance and temperature to estimate the electrical properties at standard test conditions (STC: 25°C, 1000 W/m²).
Test results, including Amps, Volts, Watts, Watts/m², Ohms, and dimensionless quantities, are typically entered automatically into a database as graphs or raw numbers, though they can also be displayed on an integrated LCD screen. In a manufacturing setting, these measurements are crucial for determining the power class of a module, enabling sorting and proper labeling (e.g., modules measuring 495-500 W are labeled 500 W, and those measuring 500-505 W are labeled 505 W).
In a solar test lab, the machine is used to assess device stability after environmental stress by comparing STC power measurements taken before and after stress. It also helps determine if a module meets its manufacturer’s power warranty by comparing measured STC power to the nameplate STC power. The light source and electrical readings are synchronized, allowing for triggered electrical measurements at various time delays after the light source activates.
Additionally, the device can adjust temperature or irradiance to re-measure electrical properties under different test conditions, which is valuable for determining temperature coefficients of current and voltage, and low-light efficiency for device datasheets. In other uses, the temperature or irradiance are adjusted, and the device’s electrical properties are re-measured, which can determine the electrical properties at different test conditions.
This type of measurement is useful for measuring the temperature coefficients of current and voltage, and low-light efficiency of the device, which is needed for the datasheet of the device.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355574).