The tariff classification, country of origin, and United States-Mexico-Canada Trade Agreement (USMCA) eligibility of a conventional radio frequency probe
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As previously noted, the RF probe is classified under subheading 9018.90.7580, HTSUS.
- The RF probe is classified under subheading 9018.90.7580, HTSUS.
Ruling text
In your letter dated December 3, 2025, you requested a ruling for the tariff classification, country of origin for marking purposes, and eligibility of a conventional radio frequency probe under the USMCA. Additional information was provided by email dated December 18, 2025. The product under consideration is a conventional radio frequency (RF) probe. It consists of a thermocouple, a Radel handle, a three-conductor cable, a Radel cap, a four-pin connector, heat shrinks, and a plastic protective sheath.
The RF probe is a component of an RF ablation system, a pain management system that uses heat from RF energy to disrupt pain signals from specific nerves. The RF ablation system consists mainly of an 80-watt RF generator, cables, probes, and cannulas. The system works by inserting the desired cannula into the patient’s body. The cannula is then replaced by a probe that is placed adjacent to the nerve transmitting the pain.
The generator produces a high-frequency radio wave current that is sent through the wires into the probe. The radio frequency waves will activate the ions present, resulting in friction and heat. This process, called ionic heating, will burn the targeted nerve. The lesion prevents the pain signals from flowing through that nerve for up to twelve months. The process of making the RF probe will take a raw material hypo-tube, change it into a thermocouple, and then further transform it into the RF probe.
The hypo-tubes are a raw material from the United States or South Korea used to make the finished RF probe. The purchased hypo-tubes are seamless T304 stainless steel and come in various lengths and diameter s. The various tube lengths are shipped in pre-cut lengths with deburred “squared off ends.” The tubes are considered unfinished and not coated. The hypo-tubes are imported into Mexico and then processed into a thermocouple subassembly.
A thermocouple is two dissimilar metals, joined at one end, to measure temperature. This subassembly process includes tinning, ultrasonic washing, and laser welding. Tinning is a specialized process of coating a portion of the hypodermic tube with silver solder ribbon, which is sourced from the United States. After soldering, the tube is then washed in a specialized ultrasonic washing machine. Next, a constantan wire made in the United States is inserted into the tube and laser welded into a dome.
A constantan wire is a copper-nickel alloy wire that is used as a heating element in the probe. Prior to shipping to Mexico, the constantan wire is coated with a red polyimide insulated coating. The dome is formed as a result of the laser welding between the stainless steel hypo-tube end and the constantan wire protrusion. The dome covers the end of the tube that will be ultimately used on a patient. The preceding processes describe the changes from a raw hypo-tube into a new thermocouple subassembly.
The subassembly consists of the hypo-tube (outer shell), capped with a laser welded dome, and a constantan wire that runs through the middle of the hypo-tube. However, the other end of this subassembly remains unfinished.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356696).