Recent U.S. Customs and Border Protection rulings from CROSS, searchable by HTS code, keyword, or ruling number.
In your letter dated October 8, 2026, you requested a tariff classification ruling. Additional information was also provided by email. The product under consideration is the ExactaMix EVA Bag, a flexible bag made from medical-grade ethylene-vinyl acetate (EVA) plastic. The bags are available in multiple volumetric capacities and in single- and dual-chamber configurations. They feature integrated ports for fluid transfer and filling, a closed sterile fluid pathway, and connections compatible with standard intravenous tubing sets.
In your letter dated October 5, 2026, you requested a tariff classification ruling. Additional information was provided by email. The product under consideration is a 1 mL clear glass syringe barrel with a permanently attached stainless steel needle that you refer to as a cannula. The needle is secured to the glass barrel with an acrylic-based adhesive, and the assembled product is intended for use as a ready-to-fill primary pharmaceutical container. In a clean area, the barrel and needle are washed with water for injection, siliconized, and dried.
In your letter dated September 25, 2026, you requested a tariff classification ruling. Additional information was provided via email. The imported product is a high-pressure syringe set, model REF 200111.The complete syringe set is housed in a blister tray, which consists of a barrel, a plunger assembly, a coiled tube, a fill tube, a long spike and dust caps.
In your letter dated September 28, 2026, you requested a tariff classification ruling. The product under consideration is the Intermediate Gear Assembly, SKU No. 1.001.3515. As you state, it is a uniquely dedicated and integral component of a dental handpiece. The Intermediate Gear Assembly is installed between the dental motor drive connection (spur wheel) and the dental head (drive-mounted component).
In your letter dated September 24, 2026, you requested a tariff classification ruling. Additional information was also provided by email. There are three products under consideration: the Orchid series, Butterfly EVO series, and Flamingo HD Camera and Light System. All three are battery-powered LED headlight systems; however, the Flamingo system also includes an HD camera. As you indicated, the products are designed for use by dental and medical professionals and attach to compatible loupes or eyewear to illuminate dental or surgical procedure area.
In your letter dated July 16, 2026, you requested a tariff classification ruling on behalf of your client, EyePoint US, Inc. Additional information was provided by email on July 20, 2026. The item under consideration is an eye injector specifically designed to inject a solid dose of medication into the appropriate position within a patient’s eye. The injector consists of a plastic assembly with a barrel, a plunger assembly, an extended stop plunger, and a needle cap. The needle is not included with the injector at the time of importation.
In your letter dated July 10, 2026, on behalf of S.M.A.I.O SA, you requested a tariff classification ruling. Additional information was provided via email dated July 16, July 17, and July 20, 2026. The products under consideration are the KHEIRON® Spinal Fixation System, the KHEIRON® Surgical Instrument System, and the KHEIRON® Sterilization Containers. You state that the components of the KHEIRON® Spinal Fixation System and the KHEIRON® Surgical Instrument System may be imported separately and subsequently assembled into complete systems in the United States.
In your letter dated July 7, 2026, you requested a tariff classification ruling. The items under consideration are safety needles and pen cartridge holders. Both items are imported separately, not in assembled form, and without any medication or active substance included. They are distinct items used exclusively in the assembly of the BesremiPen - a prefilled, self-injector device. The safety needles are sterile, single-use needles designed with a snap-fit mechanism rather than a threaded design. This prevents removal and reuse after use, consistent with their intended safety purpose.
This is our decision in response to your request of February 26, 2025, filed on behalf of your client Amphenol Critical Medical Technologies, LLC (formerly Providien Device Assembly, LLC), for the revocation of New York Ruling Letter (NY) N319324, issued on May 25, 2021. There, U.S. Customs and Border Protection (CBP) classified certain transducer arrays from Israel under heading 8543 of the Harmonized Tariff Schedule of the United States (HTSUS). You request that CBP reclassify the merchandise at issue under heading 9018, HTSUS.
In your letter dated April 9, 2026, you requested a tariff classification ruling. The item under consideration is the Braided Shaft BFlex 5.0 (Item No. 0120-1063 Rev.00), a thin, flexible, hollow insertion tube that is a component of the BFlex 2 Flexible Bronchoscope. It is constructed from a medical-grade thermoplastic elastomer casing, reinforced with a stainless-steel spring temper wire braid embedded within the plastic. This design provides essential torque control, radial compression stiffness, and flexibility.
In your letter dated March 31, 2026, you requested a tariff classification ruling on behalf of your client, Koru Medical Systems, Inc. The items in consideration are the Precision Flow Rate Tubing, High-Flo Subcutaneous Safety Needle Sets, and Adapter. The Precision Flow Rate Tubing is made of medical grade non-DEHP PVC tubing and features luer connectors and disposable plastic end caps on both ends, as well as a slide clamp. It is designed to connect to a syringe on one end and, on the other end, to a High-Flo Needle Set or vascular access device.
In your letter dated April 3, 2026, you requested a tariff classification ruling, on behalf of your client, AVNA. The items under consideration are Part No. 3013-4, the “inner sleeve” of the articulation joint; Part No. 3013-6, the circular collar/flange-like part with an extended tab, which you described as “nut”; and Part No. 4210-2, the hollow, bobbin-shaped aluminum part. Part No. 3013-4, and Part No. 3013-6, are stainless-steel parts of the articulation joint in the Signia Stapling System.
Source: rulings.cbp.gov (CROSS). This index holds New York rulings from the recent period and the Headquarters rulings they cite. It is not the full CROSS database of 222,467 rulings, and it does not hold every Headquarters ruling. New rulings usually appear here within a few days of CBP publishing them; a ruling published long after its number was assigned can take several weeks. Revoked, modified and proposed marks come from the weekly Customs Bulletin, where CBP publishes most such actions under 19 U.S.C. 1625(c), read here from the Nov 2024 issues onward, and from the subjects of indexed Headquarters rulings. A revocation is marked from the date it takes effect. The absence of a mark is not confirmation that a ruling is still in effect. A ruling letter is binding on CBP only for the particular transaction or issue it describes (19 CFR 177.9). Confirm the text and status on CROSS before relying on a ruling. Not legal advice.