The tariff classification, country of origin, and eligibility of the United States-Mexico-Canada Agreement of an Electrochemical Water Purification System
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As mentioned above, the subject assembly is classified under subheading 8421.21.
Ruling text
In your letter dated February 19, 2026, on behalf of your client, Axine Water Technologies Inc., you inquire whether an Electrochemical Water Purification System is eligible for duty free treatment under the United States-Mexico-Canada Agreement (USMCA). You also request a classification and country of origin ruling for marking purposes. Descriptive literature was provided for our review.
The merchandise under consideration is described as an Electrochemical Water Purification System, consisting of two reactor vessels, a DC power supply, a plate-and-frame heat exchanger, and associated piping and control equipment. In operation, a direct current (DC) is applied to the reactors, which contain anode and cathode surfaces. The applied current induces electrochemical reactions on these surfaces that oxidize and/or reduce pollutants in the feed water.
The system may also generate oxidants (such as hydrogen peroxide or hydroxyl radicals) that further react with contaminants. The process also generates heat, which is removed by the system’s plate-and-frame heat exchanger connected to an external cooling source. The treated effluent is discharged as purified water and the treated wastewater is disposed.
The system is enclosed within a modified 20' high cube (HC) steel container equipped with exterior access panels and a walk-in entrance door providing access to the interior. Each of the primary modules are fully assembled in Canada from components sourced worldwide. These modules include the purge air skid, reactor feed skid, heat exchanger skid, reactor manifold skid, clean in place skid, reagent dosing system, transfer skid, main distribution panel, and reactor power panel.
The Canadian components include clamps, wire cable trays, brackets, couplings, washers, screws, fittings, chem secondary containment, a modified 20' HC container, plates, motors, and EOX reactors. The U.S. components include fittings, clamps, tubes, nozzles, pipe, bushings, flanges, gaskets, pumps, filters, sensors, reactor tank, a purge air scrubber, and flow transmitters. The Mexican components include transformers and outlet boxes. The remaining components are all sourced outside of North America.
The Chinese components include nuts, bolts, screws, bushings, fittings, straps, channels, springs, receptacles, strainers, temperature transmitters, and analytical transmitter conductivity.
The remaining small parts are sourced from Switzerland (glue sockets and scales), Turkey (cables), the United Kingdom (switches and sensors), Thailand (washers, nuts and screws), Italy (chemical resistant discs and buttons), India (brass connectors), Taiwan (purge air blower and screws), India (washers), Austria (strainers), Germany (pumps, switches, nozzles, injection quill, and connectors), Indonesia (LED light stack), Japan (mounting bracket and plugs), Poland (heat exchanger), and Hungary (switches).
The manufacturing process starts in Canada with the modification of the cube steel container. The skid frames are then assembled outside the container by mounting the individual components and equipment onto the frame with brackets before the PVC and CPVC pipe is cut, glued, and installed.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359001).