The tariff classification of two stainless steel pan head screws from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 24, 2026, you requested a tariff classification ruling. Photographs and descriptions of two stainless steel panhead screws were submitted with your inquiry. The first article is described as an M2.5 - .95 × 8 Pan head, Torx T-8, Black Screw, SKU number 311-00001-000.A1. It is a fully threaded, stainless steel, zinc plated, pan head, thread forming screw with a 6 lobe Torx drive and a blunt tip. It measures 2.5 mm in diameter and 8 mm in length and has a thread pitch of .95 mm.
You state it is used to hold together the upper and lower housing of the control box for the Sierra Headset. The second article is described as an M3 - 1.34 × 8 Pan head, Torx, Thread Forming, Black Screw, SKU number 311-00003-000.A1. It is a fully threaded, stainless steel, zinc plated, pan head, thread forming screw with a Torx Plus head and a blunt ip. It measures 3 mm in diameter and 8 mm in length and has a thread pitch of 1.34 mm.
You state it is used to secure the top of the Sierra headband assembly to the bottom of the headband assembly.
The applicable subheading for the two stainless steel pan head screws, SKU number 311-00001-000.A1 and SKU number 311-00003-000.A1, will be 7318.15.6010, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Other screws and bolts, whether or not with their nuts or washers: Other: Having shanks or threads with a diameter of less than 6 mm… Socket screws: Of stainless steel.
The duty rate will be 6.2 percent ad valorem. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein.
This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and Frequently Asked Questions on the Trade Remedy/IEEPA page at https://www.cbp.gov/trade/programs-administration/trade-remedies/IEEPA-FAQ. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359117).