The classification of phenolic film-faced and medium density overlay plywood from Ghana
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the plywood covered with both phenolic film and MDO will be 4412.31.9200, HTSUS, which provides for Plywood, veneered panels and similar laminated wood: Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness: With at least one outer ply of tropical wood: Other: Other.
- The rate of duty will be 8 percent ad valorem.
Ruling text
In your letter, dated March 3, 2026, you requested a binding classification ruling on plywood with both a phenolic film and a medium density overlay (MDO) on the outer plies. Product information and a sample were provided for our review. The product under consideration is approximately 18mm in thickness. The plywood consists of 11 veneers of wood laminated together with the grain of each layer running at a 90-degree angle to the grains of the adjacent layers. No ply exceeds 6mm in thickness.
The face and back plies are constructed of gmelina wood (Gmelina arborea, a tropical wood) and the core is constructed of gmelina and eucalyptus woods. The sample provided is covered on one outer ply with a phenolic film and is covered on the other outer ply with MDO, or paper that is impregnated with resin. Both the coating and covering obscure the grain of the wood beneath. We note that you indicate the wood is from Ghana, but you do not indicate where the plywood was manufactured.
The Harmonized Commodity Description and Coding System Explanatory Notes (ENs) constitute the official interpretation of the Harmonized System at the international level (for the 4-digit headings and the 6-digit subheadings) and facilitate classification under the Harmonized Tariff Schedule of the United States (HTSUS) by offering guidance in understanding the scope of the headings and the General Rules of Interpretation (GRIs).
While neither legally binding nor dispositive of classification issues, the ENs provide commentary on the scope of each heading of the HTSUS and are generally indicative of the proper interpretation of the headings. See T.D. 89-80, 54 Fed. Reg. 35127-28 (Aug. 23, 1989).
The instant product meets the definition of “plywood” as set forth in the ENs to heading 4412 of the HTSUS, as it is constructed of “three or more sheets of wood glued and pressed one on the other and generally disposed so that the grains of successive layers are at an angle.” Plywood is specifically provided for in heading 4412, HTSUS, and this product is classified in that heading in accordance with GRI 1.
The phenolic resin film and MDO are surface coverings as described in Additional US Note 1(c) to Chapter 44, HTSUS: The term "surface covered," as applied to the articles of headings 4411 and 4412, means that one or more exterior surfaces of a product have been treated with creosote or other wood preservatives, or with fillers, sealers, waxes, oils, stains, varnishes, paints or enamels, or have been overlaid with paper, fabric, plastics, base metal, or other material.
This note specifically provides that plywood of heading 4412, HTSUS, may be surface covered with a variety of materials. The phenolic resin film is covered by the term “plastics” and the MDO is covered by the term “paper”. Because the film and MDO obscure the grain of the wood, the panels will be classified as plywood that is surface covered with a material that obscures the grain of the face ply.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359403).