The tariff classification of an active grille shutter from Thailand
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Key passages, quoted from the ruling
- The applicable subheading for the active grille shutter, MB3B-8475-XX, will be 8481.80.9025, HTSUS, which provides for Taps, cocks, valves and similar appliances…parts thereof: Other appliances: Other: Other: With electrical or electro-hydraulic actuators: Other.
- The general rate of duty will be 2 percent ad valorem.
Ruling text
In your letter dated April 8, 2026, you requested a tariff classification ruling on behalf of your client, Ford Motor Company. The subject product is an active grille shutter, part number MB3B-8475-XX.
The active grille shutter, which is mounted behind the grill of a vehicle, consists of a structural plastic frame that incorporates multiple movable louvers (shutter blades), an actuator assembly (12v DC brushed motor), an air deflector, a wiring assembly, and a linkage mechanism connecting the actuator to all the louvers. The grille shutter also features pivot points and bearings that allow each louver to rotate within the frame.
When the grille shutter is activated, it drives the linkage mechanism attached to each louver, causing all louvers to rotate simultaneously between open, closed, or intermediate positions. The shutter is designed to be mounted in front of the radiator and behind the bumper of a passenger vehicle. The grille shutter is a dynamic product that operates in an entirely automatic manner and is controlled by the vehicle’s electronic control unit (ECU), which is separately imported.
The ECU adjusts the shutter position based on real-time data such as engine temperature, vehicle speed, ambient air temperature, and engine load. The ECU sends commands to the actuator, which adjusts the shutter to control airflow for aerodynamics or cooling. In hotter temperatures or when the vehicle is under load such as towing, the shutter will open allowing unlimited air to enter the engine bay.
During freeway driving the shutter will close to prevent air with debris from hitting the radiator and for better aerodynamics for fuel consumption. In your letter, you suggest classifying the grille shutter in subheadings 8708.29, Harmonized Tariff Schedule of the United States (HTSUS), which provides for vehicle body parts. Alternatively, you proposed classification of the product in subheadings 8708.91, HTSUS, as parts of radiators or 8708.99, HTSUS, as other parts and accessories of motor vehicles.
To justify the classification in heading 8708, HTSUS, you cited New York (NY) Rulings 850403, dated March 29, 1990; G89130, dated April 23, 2001; N024379, dated March 18, 2008; N265868, dated August 23, 2015; and N349599, dated June 23, 2025. Ruling 850403 describes the article as a “…radiator bug screen… comprised of a steel alloy screen, polyester fabric, and eye grommets which fasten the bug screen to the front of a truck tractor.
The article covers the outside of the truck tractor radiator and is used to keep insects from clogging the radiator.” As can be seen from the description, the article is different from the active grille at issue, since it contains no mechanical elements. Ruling G28130 describes the article as a “Front Grille: Sheet metal stamping.” No additional information is mentioned.
However, from the given information, this office can deduce that there are no mechanical features in the front grille, unlike the active grille shutter at issue.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N360522).