Recent U.S. Customs and Border Protection rulings from CROSS, searchable by HTS code, keyword, or ruling number.
In your letter dated September 15, 2026, you requested a tariff classification ruling. The product at issue is a Gas Utility Bypass Valve Stem. The valve stem, which functions as a manual actuator, is installed into the center of a valve body and is engineered to directly interface with the internal valve operating mechanism that controls the flow of natural gas. The circular valve stem is primarily constructed of iron material and features a rubber over mold.
In your letter dated August 20, 2026, you requested a tariff classification and country of origin determination ruling. The product at issue is a tire inflator, model SP00006. This device features an air hose assembly, a digital LCD display for pressure readings, and a valve housed in a pistol-grip body design (main body and trigger) constructed of plastic material. Once the power button is activated, the user can monitor tire pressure and based on the display reading, operate the valve to inflate or deflate the tire as needed. The tire inflator is packaged with batteries from China.
In your letter dated August 5, 2026, you requested a tariff classification ruling on two products. Product one is the Hedgehog Ball Valve (item number DC-100). The valve is primarily made of injection-molded ABS (Acrylonitrile Butadiene Styrene) plastic and is actuated by manually turning a handle located on the side of the valve body. The ball valve is designed to control dust flow within ducts used in wood shops. Product two is the Hedgehog Silicone Duct Band (item numbers DC-40 & DC-60). Each band is designed to provide a vacuum seal by covering the seams of duct segments.
In your letter dated July 7, 2026, you requested a tariff classification ruling. The product under consideration is referred to as a life support gas-line system. The packaged system consists of a gas manifold, a zone valve box with an alarm sensor, a gas outlet and an LCD alarm system with accessibility for the visually and hearing impaired. The gas manifold consists of front and back covers that incorporate four regulators, a relief valve and a control box that has pressure transducers that send information to the system’s main circuit board.
This letter replaces Ruling Number N360440 dated April 28, 2026, which previously addressed the classification of the coolant manifold assembly. This submission provides additional information concerning the application of the product. The Model W68 coolant manifold assembly consists of three rectangular shell components and an additional fourth component. These components incorporate specially designed pathways for coolant circulation and storage and provide mounting points for items such as a coolant pump and a valve.
In your letter dated April 8, 2026, you requested a tariff classification ruling on behalf of your client, Ford Motor Company. The subject product is an active grille shutter, part number MB3B-8475-XX. The active grille shutter, which is mounted behind the grill of a vehicle, consists of a structural plastic frame that incorporates multiple movable louvers (shutter blades), an actuator assembly (12v DC brushed motor), an air deflector, a wiring assembly, and a linkage mechanism connecting the actuator to all the louvers.
In your letter dated April 9, 2026, you requested a tariff classification ruling on behalf of your client, INZI Controls. The item at issue is referred to as a coolant check valve, part number 1923876-00-D. The valve consists of an upper and lower core that incorporate a spring, a piston, and an O-ring. It operates by responding to pressure differentials in the cooling circuit, causing the piston to move up and down to maintain a one-way flow of the coolant and to prevent a reverse flow of this fluid.
In your letter dated April 3, 2026, you requested a tariff classification ruling, on behalf of your client, INZI Controls. The item at issue is a water temperature control assembly, part number 05048424AD / 54253212. The assembly consists of a thermostat valve (an aluminum housing that incorporates a piston, spring, frame, a rubber component, a seal cap, and a wax element), a bypass nipple, a temperature sensor and a structural junction that features coolant bypass passages. As coolant temperature changes, the wax element of the valve expands or contracts, causing the valve to open.
Source: rulings.cbp.gov (CROSS). This index holds New York rulings from the recent period and the Headquarters rulings they cite. It is not the full CROSS database of 222,467 rulings, and it does not hold every Headquarters ruling. New rulings usually appear here within a few days of CBP publishing them; a ruling published long after its number was assigned can take several weeks. A ruling is marked revoked or modified only when an indexed Headquarters ruling says so, so the absence of a mark is not confirmation that a ruling is still in effect. A ruling letter is binding on CBP only for the particular transaction or issue it describes (19 CFR 177.9). Confirm the text and status on CROSS before relying on a ruling. Not legal advice.