The tariff classification of prefabricated modules from Thailand
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 22, 2026, you requested a tariff classification ruling. The subject prefabricated modules will be permanently installed at a petrochemical manufacturing facility in Texas. The modules are designed to be stacked vertically on piling foundations to form an ethane cracking furnace, which is described as a thermal processing unit that uses high-temperature cracking to convert ethane feedstock into ethylene and hydrocarbon products.
Within the furnace, ethane is mixed with steam at elevated temperatures, a process that breaks molecular bonds and creates lighter hydrocarbon products. A total of ten modules will be imported together in a single shipment. The finished furnace, which will be called Furnace XXIF-01, will be connected to a group of eight existing furnaces at the ethane processing complex. The first module is referred to as the Lower Radiant Section or Firebox.
This module forms the lower section of the overall ethane cracking furnace and will consist of a refractory-lined chamber fitted with burners underneath its floor. The function of this module is to generate intense radiant heat, which is sent through vertical radiant tubes to drive the reaction. The radiant tubes are installed after importation and are not part of this request. The second module is referred to as the Upper Radiant Section and is installed directly above the first module.
This module functions as an extension of the Lower Radiant Section and consists of a refractory-lined chamber mounted in a structural frame. Its radiant tubes will also be installed after importation and are not part of this request. The third and fourth modules are referred to as Convection Sections. They are stacked one on top of the other and configured to both pre-heat the ethane feed and to superheat very high-pressure steam.
Flue gas is used as a heat source to raise and lower the temperature of the feed and steam, transferring thermal energy between the flue gas, the feed, and the steam. At the time of importation, these two modules will each contain a refractory-lined chamber and structural supports for the heat-exchange tubes. The internal components, such as the primary heat-exchange tubes, secondary heat exchanger, and custom valves, are sourced separately and installed onsite.
Also included is a separate module referred to as the Control Valve Deck, which is described as a steel structural platform that will be attached to the third module in the United States. This platform allows physical access to module three and does not contain any mechanical equipment. The fifth module consists of a high-pressure steam drum and an induced draft fan mounted in a structural frame. This module is mounted directly on top of the fourth module.
The steam drum is described as a carbon-steel pressure vessel designed to recover heat from the furnace flue gases. The function of the fan is to maintain controlled negative pressure within the furnace by continuously drawing flue gases through the radiant and convection sections.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N361753).