The tariff classification of a valve body casting from Denmark
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the valve body casting will be 8481.90.9020, HTSUS, which provides for Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: Parts: Other: Of valves of subheading 8481.20: Valve bodies.
Ruling text
In your letter dated October 8, 2026, you requested a tariff classification ruling. The product at issue is a rectangular valve body casting. The ductile iron casting will be imported with engineered cavities corresponding to the functional elements of the PVB32 hydraulic directional control valve.
The cored passages and contours function as hydraulic fluid paths, while its exterior includes specific openings for fluid passages, electrical and mechanical component installations, and the mounting of an actuating handle assembly. Subsequent to importation, the casting undergoes machining processes to function as a housing (part number 11119177) for a spool valve assembly.
Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs). GRI 1 states in part that for legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes. GRI 2(a) extends the scope of the HTSUS headings to include unfinished parts, provided the unfinished parts have the essential character of the finished parts.
GRI 2(a) further states that: Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as entered, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also include a reference to that article complete or finished (or failing to be classified as complete or finished by virtue of this rule), entered unassembled or disassembled.
In addition, Explanatory Note (EN) II under GRI 2(a) states that: The provisions of this rule also apply to blanks unless these are specified in a particular heading. The term “blank” means an article, not ready for direct use, having the approximate shape or outline of the finished article or part, and which can only be used, other than in exceptional cases, for completion into the finished article or part.
Semi-manufactures not yet having the essential shape of the finished articles (such as is generally the case with bars, discs, tubes, etc.) are not regarded as “blanks.” Accordingly, two criteria which an article must meet in order to be classified as a blank for purposes of GRI 2(a) are (1) it must possess the approximate shape or outline of the finished article, and (2) the sole use must be for completion into the finished article.
In this case, GRI 2(a) is applicable to the valve body casting when imported in a pre-machined condition, as it will satisfy the criteria stated above. It will have the approximate shape or outline of a finalized valve body at the time of importation. It cannot be used for any other purpose. In a pre-machined condition, the casting will be readily recognizable as the finished article, and there is nothing to suggest that in this condition, the casting has any practical use other than as a finished valve body.
Therefore, this office finds that the casting, when imported in a pre-machined condition, has the essential character of a complete or finished good classified within heading 8481.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N365876).