The tariff classification of multilayer wood panels from Indonesia
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter, dated January 5, 2024, you requested a binding tariff classification ruling. The ruling was requested for multilayer wood panels. Product information and a sample were submitted for our review. The products under consideration are multilayer wood panels. You state that the panels measure 4 feet wide by 8 feet long and between 9 millimeters to 19 millimeters in thickness. The panels are constructed of 7 or 9 wood layers or plies, none of which exceeds 6 mm in thickness.
The core consists of Falcata (Paraserianthes falcataria), and Jabon (Anthocephalus cadamba), both identified as tropical woods in the Annex to Chapter 44, Appellation of Certain Tropical Woods, The Harmonized Commodity Description and Coding System Explanatory Notes (ENs). The grain of each layer runs at a 90-degree angle to the successive layers. The face and back plies consist of birch (Betula spp.), a nonconiferous wood, measuring 0.25 millimeter in thickness.
You state that the outer plies of birch veneer are covered with a clear urethane coating.
The Harmonized Commodity Description and Coding System Explanatory Notes (ENs) constitute the official interpretation of the Harmonized System at the international level (for the 4-digit headings and the 6 digit subheadings) and facilitate classification under the Harmonized Tariff Schedule of the United States (HTSUS) by offering guidance in understanding the scope of the headings and the General Rules of Interpretation (GRIs).
While neither legally binding nor dispositive of classification issues, the ENs provide commentary on the scope of each heading of the HTSUS and are generally indicative of the proper interpretation of the headings. See T.D. 89-80, 54 Fed. Reg. 35127-28 (Aug. 23, 1989).
The term “plywood” is defined in the ENs for heading 4412, Harmonized Tariff Schedule of the United States (HTSUS), as a panel “consisting of three or more sheets of wood glued and pressed one on the other and generally disposed so that the grains of successive layers are at an angle.” This definition describes the instant panels. Plywood is specifically provided for in heading 4412 of the HTSUS, and the panels are classified in that heading in accordance with General Rule of Interpretation 1.
Additional US Note 1(c) to Chapter 44, HTSUS, also provides that coating or covering the surface of a good of heading 4412 does not preclude classification in heading 4412: The term "surface covered," as applied to the articles of headings 4411 and 4412, means that one or more exterior surfaces of a product have been treated with creosote or other wood preservatives, or with fillers, sealers, waxes, oils, stains, varnishes, paints or enamels, or have been overlaid with paper, fabric, plastics, base metal, or other material.
The clear urethane coating applied to the panels constitutes a “surface covering”. Therefore, this coating does not preclude classification in heading 4412.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344667).