The country of origin of faucets
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 2 percent ad valorem.
Ruling text
In your letter dated June 13, 2025, you requested a country of origin ruling on behalf of your client, The Home Depot. Descriptive information was provided for our review. Stock Keeping Units 1009029257, 1009029258, and 1009029259 are each referred to as the Dual Sensor Touchless Pull-Down Kitchen Faucet in Brushed Nickel with 4-function Turbo Spray and Fast Mount.
The faucets, which are unassembled sets, consist of a faucet body with a cartridge valve and a solenoid valve, a battery box, and a sprayer head packaged together ready for retail sale.
The applicable subheading for the Dual Sensor Touchless Pull-Down Kitchen Faucets will be 8481.80.9050, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: Other appliances: Other: Other: Other. The general rate of duty will be 2 percent ad valorem.
With respect to origin, the assembly of the faucet sets occurs in Thailand and consists of valves, and other components from China. To assemble the faucet spout, an oiled O-ring seal is installed into the corresponding connection of the cartridge valve, which is subsequently installed into the body of a faucet. Then a solenoid valve core sourced from China is pressed into a seat sourced from China. Afterwards, a lubricated O-ring is installed into a seal.
The seal and O-ring are then installed into a corresponding connector, which is subsequently installed into the body of the faucet. The core of the solenoid valve is then screwed onto the valve seat. Next, a spring is installed onto the solenoid valve and afterwards inserted and screwed into the body of a faucet. Using adhesive, a spout sourced from China is connected to the body of the faucet and screwed in place. The power cord of the induction module is then connected to the solenoid valve power supply.
Once connected, the power supply is positioned between the gap of the faucet body and the valve, and the induction module is installed into the induction window. Next, adhesive is applied onto the inlet and outlet water hoses, and the inlet hose is appropriately installed, and the outlet water hose is screwed into the valve core seat. Afterwards, a fixed pipe connector is installed into the hose, and adhesive is installed into threads of the inner wall of the faucet body.
Subsequently, the fixed panel is installed into the faucet body and the pipe connecter is screwed into the faucet body. Lastly, the power cord of the induction module is installed within the cold-water inlet pipe. The battery box is also assembled in Thailand, which is completed by screwing a cover to a battery box from China. Afterwards, batteries are placed in a bag and then taped to the box. Also, assembled in Thailand are a base plate, a pipe sleeve bushing, and an outlet pipe with a pull-out hose.
The base plate is installed into the fixed pipe connector and snapped in place. The pipe sleeve bushing, which features a ribbed end facing, is installed into a pipe sleeve and pressed in place.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350185).