The tariff classification of a quench press from India
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated September 12, 2025, you requested a tariff classification ruling. The merchandise under consideration is identified as the Gleason 685Q Bevel Quenching Machine and is described as a machine that uses a quenching process to finish bevel gears. The quenching machine has a framed enclosure with sliding doors, access panels, and a main operator pendant. Its main components include a programmable logic controller, a quenching oil system, and a hydraulic system.
The hydraulic system controls the flow of quenching oil and operates various components, including a lower die slide and upper die slide that clamp the workpiece in place. Additional tools, such as spacers, pressure rings, expanders, support rings, etc., can be added to the slides. Together, the die, the quenching chamber, and the tools control and prevent any distortion to the workpiece as it is cooled.
The workpiece is cooled by the quenching system using controlled cycles and custom parameters like temperature, timing, flow rate, and pressure. A typical cycle begins with placing the workpiece in the lower die slide, which then retracts into the quenching chamber. Next, the upper die slide fully lowers to lock the workpiece in place, and the quenching cycle begins. When the quenching cycle is complete, the upper die slide raises so that a worker can remove and inspect the workpiece.
In your request, you suggest that the machine is classifiable in subheading 8461.40.5050, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included: Gear cutting, gear grinding or gear finishing machines: Gear grinding or finishing machines: Other: For bevel gears.” We disagree.
Classification under the HTSUS is in accordance with the General Rules of Interpretation (GRIs). GRI 1 provides that the classification of goods will be determined according to the terms of the headings of the tariff schedule and any relative section or chapter notes. In the event that the goods cannot be classified solely on the basis of GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRIs 2 through 6 will then be applied in order.
The Harmonized Commodity Description and Coding System Explanatory Notes (ENs) constitute the official interpretation of the HTSUS. While not legally binding nor dispositive, the ENs provide a commentary on the scope of each heading of the HTSUS and are generally indicative of the proper interpretation of these headings. See T.D. 89-80, 54 Fed. Reg. 35127 (August 23, 1989).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353692).